SMP11modem protector

Description
This telephone, modem and facsimile protector suppresses transient overvoltages for a two wire local loop wire pair(Tip and Ring) connected to the center terminals of a six position RJ11 modular jack. The 185 Volt rating permits use on lines having 90 Vrms analog ring voltages superimposed upon the 48Vdc central office supply voltage.
Specifications
Vop max=185V,ILmax=5mA, Vc=340v@500A 8x20us, Rsmax=12 Ohms, Cmax=500pF
Dimensions
2.3"x1.5"x1.1"+36"

420E235Gloop protector

Description
The 420E235G and others in this series provides two lines or one loop of protection for 4-20 mA control loops with power supply voltages from 12 to 60 Vdc. This protector can be mounted with double back adhesive tape, a 6-32 machine screw in the bottom center or hanging by its leads.
Specifications
Vop=12, 25, 28, 35 and 60 Volts, IL=5ua, Vc=24, 40, 40, 60 and 85@500A, 8x20us, Rsmax=12 Ohms, C=6000, 3000, 3000, 3000 and 1500pF
Dimensions
1.4"x1.2"x0.87"+3"

CX12cable protector

Description
The CX12 provides two female BNC connectors, RFI shielding and a low capacitance circuit to protect coaxial high speed data, signal and video lines from transient overvoltages.
Specifications
Vop max+or-12V, ILmax=5yA, Vc=24V@500A 8x20us, IL=<0.5db@10MHz
Dimensions
3.7"x1.15"x1.0"

PIP120AC protector

Description
The PIP120 is a high energy capable protector with excellent voltage clamping performance. It is used in single phase across the line AC applications.
Specifications
BVmin@1mA200V, Vcmax@47A, 10x1000=319V, Pp=15kW, Prms=7.5 Watts
Dimensions
2.6"x1.38"x0.5"

CLPS421BE0705 dataline protector

Description
This plug in provides two pair or four line protection for low voltage signal and data lines. It interfaces via a card edge to a surface mount wire screw terminal connector BCE10. Versions available for different voltages and various protection modes.
Specifications
Vop=7, 15, 20, 30, 35 or 50 Volts, ILmax=200mA
Dimensions
1.8"x1.45"x0.9"

DCPS131S1805DC protector

Description
The DCPS is a two stage, five ampere protector for 12V dc solar powered applications. The unregulated nature of the solar panel output voltage necessitates a Vopmax of 18v.
Specifications
Vop max=18 Vdc, Ip rating=45,000 A 8x20us IL=5 Amp
Dimensions
2.85"x2.25"x2.1"

SPC50N01NGP, SPC50N11NGP
RF protector

Description
The SPC50N's provide low loss protection over a wide range of RF frequencies for non-cascade applications. Versions can be supplied with various connectors and bandwidths.
Specifications
Zo=50 Ohms, RL>20dB, IL <0.25dB, BW01 1.5-400 MHz, BW1150-700 MHz
Dimensions
2.5"x1.8"x1.51"

CLPS222M5025, CLPS422M0625
dataline protector

Description
These signal line protectors, one two lines the other four, use the classical 3 element circuit with a series resistive input to provide ruggedness and excellent protection.
Specifications
Rs=25 Ohms, Vc50=+/-50V +/- 10% Vc6=+/-6V +/- 10%
Dimensions
4.95"x2.8"x1.175"
4.95"x2.0"x0.88"